Products & Solution-Wuhan Aijiang Technology Co., Ltd.-Wuhan Aijiang Technology Co., Ltd.

aijchina@aijchina.com

+86-18971558994

Products

All categories

Products
Solution
Xinhan AI

Products

Photovoltaic Series

Aerospace Series

Semiconductor Series

Energy Storage Series

Solar Cell PL Tester - DP100

The Solar Cell PL Tester DP100 utilizes a specific laser, which generates a square laser spot of 230mm×230mm through an optical system. Under the action of the laser spot, silicon wafers or solar cells emit infrared light. An infrared camera captures the infrared images of the silicon wafers or solar cells, and these images are used for defect detection.

More +

Solar Cell Sorting Machine - DG100

The three core performance indicators (uniformity, spectral matching, and light intensity stability) of the DG100 Solar Cell Single-Piece IV Sorter are all higher than industry standards. The spectral range covers 400-1100nm, meeting the spectral testing requirements of crystalline silicon cells. The solar cell module adopts a four-wire connection and a high-speed data acquisition system to ensure the accuracy of solar cell current measurement. Infrared non-contact temperature measurement accurately detects the module temperature, ensuring the accuracy of temperature correction.

More +

Solar Module IV Tester - ZG450

The ZG450 series solar module IV tester is primarily designed for measuring the power of solar modules to determine whether the module power meets qualification standards. It adopts a bottom-lighting direct light structure that simulates real sunlight irradiation conditions, covering a full spectral range of 300-1200nm with a fixed pulse width of 15ms.

More +

Solar Cell Defect Detector - DQ100

The Solar Cell Defect Detector DQ100 is designed for defect inspection of solar cells. It allows manual marking of defects, which can be stored in local or remote databases. The PC control software can interface with the customer's system via an Ethernet port to transmit test results and alarm information.

More +

Solar Cell Sorting Machine - DG500

The solar cell single-piece sorter uses a xenon lamp to simulate sunlight for testing and sorting the efficiency of solar cells. 1. Adopts A+A+A+ class light source configuration: the three core performance indicators (uniformity, spectral matching, and light intensity stability) all exceed industry standards. 2. Full spectrum: the spectral range is extended to 300-1200nm, realizing full-spectrum testing of high-efficiency crystalline silicon cells and greatly improving testing accuracy. The solar cell module adopts a four-wire connection and a high-speed data acquisition system to ensure the accuracy of solar cell current measurement. Infrared non-contact temperature measurement accurately detects the module temperature, ensuring the accuracy of temperature correction.

More +

Solar Small Module IV Tester - ZG115

The ZG115 series solar small module IV tester is primarily designed for measuring the power of solar modules to determine whether the module power meets qualification standards. It adopts a bottom-lighting direct light structure that simulates real sunlight irradiation conditions, covering a spectral range of 400-1100nm with a fixed pulse width of 15ms.

More +

AM0 Transient Solar Simulator - ASS41-0101

The ASS41-0101 AM0 transient solar simulator is a pulsed solar simulator designed to meet the testing requirements of solar cells used in aerospace equipment.

More +

Photovoltaic Simulator TAO-101

The TAO-101 series photovoltaic simulator adopts active power factor correction technology and high-frequency LLC multi-resonant soft-switching inverter technology.

More +

AM0 Transient Solar Simulator - ASC42A

The ASC42A series AM0 transient solar simulator is designed to meet the testing requirements of solar cell modules used in aerospace equipment. Adopting a direct illumination structure, the device can be installed in side-lighting or top-lighting modes according to on-site conditions.

More +

Gallium Arsenide PL/EL Integrated Tester DPQ210-F

The DPQ210-F type solar cell PL/EL integrated tester is a defect detection device for gallium arsenide solar cells. It integrates both EL and PL detection functions, enabling EL and PL tests through software operation.

More +

AM0 Dual-Light-Source Steady-State Solar Simulator TAB 205

The AM0 dual-lamp solar simulator achieves 1 Sun output under AAA-class performance through a short-arc xenon lamp, a halogen lamp, and a uniquely designed filter set. The solar simulator is equipped with a safety interlock device and an electronic shutter to control the brightness of the test environment.

More +

AM0 High-Magnification Solar Simulator AGS41A-2020

The AGS41A-2020 High-Magnification Solar Simulator is an AM0 solar simulator designed to meet the testing requirements of solar cell modules in aerospace equipment. It features a light intensity requirement of 1000x magnification (adjustable from 1x to 1000x) and an AAA-class spectrum.

More +

High-Temperature Dynamic Gate Bias (HTDGB) Aging Test System

The High-Temperature Dynamic Gate Bias (HTDGB) Aging Test System is a cutting-edge testing solution addressing the gate reliability challenges of modern power MOSFETs and IGBTs. As device switching speeds continue to increase (especially for wide-bandgap semiconductors), gates endure dynamic stresses such as voltage overshoot and ringing caused by high-speed switching in practical applications. This is more demanding for the robustness of gate oxide dielectrics and interface stability than static bias alone.

More +

High-Temperature Reverse Bias (HTRB) Aging Test System

The High-Temperature Reverse Bias (HTRB) Aging Test System is a fundamental testing platform for evaluating the long-term insulation reliability and material stability of power devices. Applying continuous high reverse voltage to devices in a high-temperature environment, this severe condition accelerates the exposure of potential risks such as gate oxide defects, internal impurity ion migration, surface passivation layer failure, and packaging material degradation.

More +

Power Cycling Aging Test System

More +

Battery Cell Charge-Discharge Test System

This system is a core equipment specifically designed for performance verification and quality evaluation of lithium battery cells. It can not only complete basic tests such as capacity, energy, and efficiency but also further support complex requirements in the process of cell R&D and production.

More +

Battery Module/PACK Charge-Discharge Test System

This system is a comprehensive performance verification platform designed for battery modules and complete battery packs (PACKs).

More +

Battery Protection Board/BMS Test System

This system is an automated testing platform specifically designed for the functional, performance, and reliability verification of Battery Management Systems (BMS) and battery protection boards. As the "brain" of the battery system, the BMS's accuracy, reliability, and safety are crucial.

More +

Electric Vehicle (EV) Safety Compliance Comprehensive Test System

The EVS series system is an integrated, automated testing solution designed to ensure the electrical safety of electric vehicles and their core components (such as battery packs, motors, motor controllers, and charging interfaces).

More +

AEPT 1000

Battery Module PACK EOL Comprehensive Test System AEPT 1000

The Battery Module PACK EOL (End-of-Line) Comprehensive Test System is specially designed for battery modules/PACKs in scenarios such as electric vehicles, container energy storage, household energy storage, and mobile energy storage. Its core application lies in end-of-line testing and quality control.

More +

ADG2400

Solar cell fully automatic sorting machine

◆ Adopt AAA-level solar simulators ◆ The sorting speed is fast, 2400pcs/h ◆ Fragmentation rate ≤0.1% ◆ Servo motor, modular design

More +

Solution

Photovoltaic

This solution focuses on the core pain points in the industrialization of photovoltaic and optoelectronic technologies. With full-process quality control + intelligent management & control as its core, it strictly complies with industry testing standards and ensures data repeatability, thus providing accurate testing support for the technological iteration of photovoltaic cells.

Learn More

Aerospace

Adhering strictly to aerospace-grade quality standards, this solution builds a full-stack, one-stop testing and verification platform covering materials, devices and systems, ensuring that products deliver outstanding performance and long-term durability in extreme space environments.

Learn More

Semiconductor

The semiconductor testing solution integrates professional testing equipment and supporting software, enabling seamless connection throughout the entire process from laboratory characteristic analysis to high-speed mass production testing.

Learn More

Energy Storage

Tailor-made for battery modules/PACKs used in electric vehicles and containerized energy storage scenarios, this solution integrates the requirements of offline automatic testing, data recording and analysis, and production efficiency optimization, serving as a comprehensive and intelligent testing platform.

Learn More

XingHan AI

Xinghan AI focuses on the field of industrial intelligent inspection. With big data collation and in-depth analysis as its core, and supported by "interpretable and traceable" data, it runs through the entire R&D-production-sales process. It helps enterprises make data-driven decisions and achieve refined operations, serving as a key core platform for Aijiang Technology's cross-field expansion.

Photovoltaic testing field

Aerospace field

Semiconductor testing filed

Energy storage field

Leave Message

If you have already experienced our product, please let us know your true feelings. Your satisfaction is our driving force for progress, while your suggestions are our valuable asset for continuous improvement.

Cookie

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

Cookie

Required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

Analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

Advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

+86-189 7155 8994

WhatsApp: +86-189 7155 8994

Email: aijchina@aijchina.com

Add: Room 3513 World Trade Building No.686 Jiefang Ave Wuhan City China

WhatsApp：8618971558994

Email：aijchina@aijchina.com

中企跨境-全域组件制作前进入CSS配置样式

在线客服添加返回顶部

右侧在线客服样式 1,2,3 1

图片alt标题设置： Wuhan Aijiang Technology Co., Ltd.

表单验证提示文本： Content cannot be empty!

循环体没有内容时： Sorry,no matching items were found.

CSS / JS 文件放置地